MMOBIEL Home Button Compatible with iPhone SE 2022 / SE 2020/8 / 8 Plus – Flex Cable Connector – Replacement – Incl. Screwdrivers – Silver

Price: $6.99
(as of May 27, 2024 18:54:36 UTC – Details)

Product Description

CAUTION: Before dissasembling your iPhone, discharge your battery below 25%!

A charged lithium-ion battery can catch fire or explode if accidentally punctured.

WARNING:

DO NOT SHORT CIRCUIT!
DO NOT DISMANTLE!
DO NOT HEAT!
DO NOT CRUSH!

Before you start: Please create a backup of your iPhone.

Step 1

Power off your iPhone.
Remove the two Pentalobe screws, located at the bottom of the iPhone, next to the lightning connector.

Step 2

Heat the bottom of the iPhone so that the adhesive softens.

Step 3

Place a suction cup just above the home button.
Pull the suction cup to create a small gap between the display and the rear case.
Insert the flat end of a spudger into the gap. Slide the spudger alongside the left side of the iPhone. Twist the spudger to widen the gap.

Step 4

Use a opening pick to free the display from the remaining adhesive that is holding the screen in place.

Step 5

Pull the display slightly away from the rear case, to unlock the clips holding it to the rear case.
Open the iPhone by swinging it up from the left side, like the cover of a book.
Do not fully try to seperate the display yet! There are several connector cables connected to the logic board.

Step 6

Remove the following tri-point (Y000) screws from the lower connector bracket.
Label the holes and the screws. When the screws are placed in the wrong holes, it might permanently damage the iPhone.

Step 7

Remove the metal lower connector bracket.

Step 8

Disconnect the battery connector from its socket on the logic board. Bend the connector to make sure it doesn’t connect with the socket and providing power to the iPhone while repairing it.
Use the point of a spudger to pry the lower display connector out of its socket.
Use the point of a spudger to disconnect the second lower display cable.

Step 9

Remove the three screws securing the bracket over the front panel sensor assembly connector.

Step 10

Remove the bracket.

Step 11

Use the point of a spudger to disconnect the front panel sensor assembly connector.

Step 12

Remove the display assembly.

Step 13

Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:

Step 14

Remove the bracket.

Step 15

Use an opening tool to pry under the left edge of the home button cable connector to disconnect it from its socket.

Step 16

Use an opening pick to gently separate the adhesive holding the home/Touch ID sensor cable to the back side of the display panel.

Step 17

Remove the home/Touch ID sensor assembly by lifting it through the front side of the display.
Congratulations! You have now successfully removed your Home Button!
To reinstall the iPhone, use the previous steps in this manual and apply them backward

Main Homebutton Compatible with iPhone SE 2022 A2783, A2595, A2785, A2782, A2784 / SE 2020 A2275, A2296, A2298 / 8 A1863, A1905, A1906, A1907 Incl. Screwdrivers – Silver
Important! By replacing the home button assembly, you will permanently lose the Fingerprint Touch ID function. Basically this item is for decoration only, touch ID and click function will not work. The Touch ID functionality will NOT work and cannot be restored because it is unique pairing with each device. For security reason, only the original home button touch sensor will work for your phone.
Compatible with iPhone SE 2022 A2783, A2595, A2785, A2782, A2784 / SE 2020 A2275, A2296, A2298 / 8 A1863, A1905, A1906, A1907. Important: Please check the Model Number of your device before purchasing this Item. You can find the Model type of your device on your device and / or in the settings.
Easy Installation: Accurate Replacement part used to Replace the broken damaged part! Perfect fit. You do not need a Technician to do it.
Product provided by MMOBIEL – We always try our best to exceed your expectations at every turn. Join the ever growing list of satisfied customers and discover the difference with MMOBIEL.